![background image](http://html1.mh-extra.com/html/bafang/bbs02/bbs02_user-manual_3409791016.webp)
16
Pedal Assist Sensor Installation
Firstly, install the pedal assist sensor on your
frame as shown in photo 1, using the sticky
adhesive that is on the base of the sensor.
The sensor should then be zip tied in place
to make sure it is secure.
The magnet should be loosened apart and
then placed onto a spoke and tightened so
that the magnet will be opposite and parallel
of the sensor as shown in photo 4.
The purpose of the pedal assist sensor is to
generate a signal from the rotation of the
wheel that the controller then processes to
know that you’re pedaling and want some
power!
The level of assistance you receive is
controlled by your handlebar display
buttons, which we already fitted with the
display, (up and down buttons).