15
Display Installation
Mounting the display is easy. The display
should be mounted to the clamp first, using
two screws.
Next, remove the nuts and bolts from the
clamp and put the clamp on the handlebars.
There are rubber spacers included in the
kit that go inside the clamp depending on
the thickness of your handlebars. Now put
the nuts and bolts back into the clamp and
tighten them securely.
Position the display so that it will be hassle
free to glance at during your ride.
The angle of the display can depend on the
rider style or the shape of the handle bars.
Attached to the Display is also a Pedal Assist
Controller. This Controller also has the On/
Off button on it.
The way this controller works is that it has a
number rating that will appear on the screen.
The higher the number, the more that the
motor will assist with your riding or pedaling.
This pedal assist controller should be slid on
to the handlebars on the side most preferred
by the rider and then tightened in a
comfortable position. This is shown in photo
2.
Tighten your brake lever in place, and do a
final check of all the controls that they are all
comfortable and tightened.
The grips can now be reinstalled to your
handlebars.
