Operating Manual BaehrTec A1200 / A2000
Page 14/64
English – V100 - Date 09/2017
Before use, please check whether the type of current and the mains voltage of the power
source are suitable for using the device. Information on the type of current and the mains
voltage can be found on the nameplate on the controller.
When setting up the device, ensure that it is placed on a level base, that it cannot fall down
and that the extracted air can escape easily.
Be sure to keep the BaehrTec A1200/A2000 out of reach of children.
Do not expose the device to direct heat sources (heaters, strong sunlight etc.).
Ensure that the power cable is not damaged due to squeezing, snapping or
rubbing on sharp edges. If you notice any damage to the mains cable,
please immediately stop working with your device, turn off the main switch
and immediately remove the safety plug from the safety socket. To be able
to work with the device again, please order a new power cable. To be able
to work with the device again, please order a new power cable. Only use
manufacturer approved mains cables to operate the device. If you require a
new cable, please contact the manufacturer. Operating the device using
different cables is not permitted.
Never operate the device with a damaged power cable.
Your device has a detachable connector plug mechanism (see section "
rear
view
")
Please ensure that the device is positioned so that a disconnection is
unlikely at all times.
Do not use the BaehrTec A1200/A2000 in damp areas such as saunas or
swimming complexes. Wetness and moisture on the controller can lead to
dangerous current leaks, which poses the risk of an electric shock.
Disconnect the device immediately from the socket.
Please send the device in for service with a description of the defect.
Avoid significant differences in temperature. This can cause dampness (condensation).
Protect the BaehrTec A1200/A2000 from frost.
The device must be switched off and disconnected from the mains before carrying out any
cleaning/maintenance work.
Disconnect the safety plug from the mains immediately should you discover any damage or
malfunctions of the device.
The manufacturer accepts no liability for damages to objects, animals or persons which are
caused by incorrect operation of the BaehrTec A1200/A2000.
Please ensure that the BaehrTec A1200/A2000 and the instruments are always in an
immaculate hygienic condition, in order that they do put your own health or that of others at
risk. For more information please refer to section
"Care (disinfection)"
of the BaehrTec
A1200/A2000.
Rings or jewellery worn while working with the device may cause scratches on the handpiece.
Such damage is excluded from the guarantee. Whilst working with the device, you should
avoid wearing jewellery.
Please only work with the suction turned on in order to suction off any pathogen-containing
dust and to prevent the handpiece motor or the handpiece from becoming warm.
Never submerge the device in liquids, and do not suck up any liquids.