Operating Manual BaehrTec A1200 / A2000
Page 36/64
English – V100 - Date 09/2017
3. Filter cartridge
The filter cartridge includes several different fleeces with different features:
•
Sound-insulating fleece
This fleece ensures that the suction noise is reduced and thus contributes to the
comfortable volume of the A1200/A2000.
•
Coarse filter fleece
This fleece filters coarser particles from the extracted air
•
Carbon filter fleece
This fleece ensures that most odours are neutralised.
•
Ultra-fine filter fleece
This fleece filters ultra-fine particles from the extracted air.
However, this fleece is also responsible for filtering viruses and bacteria from the
extracted air (maximum separation rate 99.99 %).
•
Carbon filter foam
This fleece also ensures the neutralisation of odours.
For information on how to change the fleeces of the filter cartridge, please refer to the section
"Changing the filter cartridge"
.
Before you change any of the filters, please turn off the device at the main
switch
(3)
and remove the safety plug
(58)
from the socket.
Used filters must not be cleaned and the dust bags must not be emptied and
then re-used. Always use fresh filters and a new dust bag for each filter
change.
Please put used filters in the residual waste. It is preferable to discard this in
a press-fastening bag.
4.9.1
Changing the dust bag
In principle, the dust bag must be changed immediately once the symbol for a dust bag change
lights up on the display.
If the icon for a dust bag change lights up, the suction system will no longer be fully powerful.
If you do not heed this indication, the device will switch automatically within 30 seconds back
to suction level 3. This prevents the device from being damaged.
To change the dust bag, please proceed as follows:
1)
Turn off the device at the main switch and disconnect it from the power supply.
2)
Disconnect the dust bag lid from the controller (see section
"Disconnecting/connecting
the dust bag lid to the controller"
).
3)
Remove the old dust bag from the receptacle
(39).
4)
Clean the filter chamber and the dust bag lid each time you change the dust bag in order
to guarantee proper suction power and to prevent germ formation. Think of your health!
For cleaning, we recommend the Baehr cloths Art. No. 11000.
5)
Push the dust bag carefully with the opening on the receptacle
(39),
until the (cardboard)
reinforcement of the dust bag locks into the slot on the dust bag lid.