Operating Manual BaehrTec A1200 / A2000
English – V100 - Date 09/2017
Page 43/64
11. You can turn the handpiece motor on/off using the push button
(13)
on the controller or
the push button
(55)
on the handpiece.
Please note that the suction is automatically switched off as soon as you
turn off the handpiece motor.
12. You can switch the direction of the handpiece motor to anti-clockwise or clockwise using
the push button
(16)
. This is shown on the display when the arrow indicating the direction
of rotation points in the other direction.
You can change the direction of rotation while the handpiece motor is
running.
13. You can make changes
o
before the handpiece motor is running
--> the device runs using the factory settings when the handpiece motor is switched on
o
while the handpiece motor is running
--> the changed settings will take effect immediately
14. If the display shows the symbol for a dust bag change, it is time to change the dust bag.
In this case the suction system will no longer be fully powerful. If you do not heed this
indication, the suction will switch automatically within 30 seconds back to level 3. This
prevents the device from being damaged. (For information on how to change the dust bag,
please refer to the section "
Changing the dust bag
").
We are confident that you will quickly become accustomed to working with your BaehrTec
A1200/A2000 safely and properly and wish you lots of fun and success!
4.11
Accessories
The following accessories are optionally available for your BaehrTec A2000:
4.11.1
Foot pedal (BaehrTec A2000 only)
You can purchase a foot pedal (Art No.23000001) for the BaehrTec A2000. Using this foot
pedal, you can adjust the speed continuously from 6,000 rpm to 40,000 rpm.
The device functions the same way with the foot pedal as it does without. There are only two
differences:
o
The foot pedal symbol appears on the display
o
As long as the foot pedal is connected the speed of the handpiece motor can only
be controlled using the foot pedal (you can see the currently used instrument
speed on the display when the foot pedal is activated). Here, you can use the
buttons
(5)
–
(12)
to set the maximum speed that you wish to reach when fully
depressing the foot pedal. The buttons
(14)
and
(15)
can also be used when the
foot pedal is activated. You can also adjust the maximum speed. Please note that
the selected maximum speed is only visible when the foot pedal is fully engaged.