Page 4
For technical questions, please call 1-888-866-5797.
Item 56258
SAF
ETY
O
PE
RA
TI
O
N
M
A
INT
EN
A
N
CE
SE
TU
P
Important Safety Information
WARNING! Read all instructions.
Failure to follow all instructions may result in fire, serious injury and/or DEATH.
The warnings and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by the operator.
Installation Precautions
1. Do not wear loose clothing or jewelry,
as they can be caught in moving parts.
Non-skid footwear is recommended.
Wear restrictive hair covering to contain long hair.
2. Wear ANSI-approved safety goggles and
heavy-duty leather work gloves during installation.
3. Before installation confirm that area is clear
of fuel lines, brake lines, electrical wires,
gas tanks or any other component which
could be damaged during drilling.
4. Mounting location and hardware
must support winch and load.
5. Use supplied power cords and wire rope listed
in manual only. Do not use thinner/longer
cables or link multiple cables together.
6. Do not route electrical cables near sharp edges
or parts that will move or become hot.
7. Ventilate area well before and while working
on battery. Explosive invisible hydrogen gas
can accumulate and then explode when ignited
by a spark from the battery connection.
8. Only connect to a clean, corrosion free battery.
9. Do not lean over or come in contact with
battery while making connections.
10. Remove all metal jewelry before
working near battery.
11. Connect red wire to positive battery terminal
and black wire to negative battery terminal.
12. Insulate all exposed wiring and
terminals after installation.
13. Install winch and fairlead in underwind orientation,
so that the wire rope enters and exits the
winch at the bottom of the drum.
Operation Precautions
1. Do not exceed load capacity.
Be aware of
dynamic loading!
Sudden load movement may
briefly create excess load causing product failure.
2.
Do not maintain power to the winch if the
motor stalls.
Verify load is within rated capacity
for the wire rope layer
—
see
Specifications
on
page 2. Make sure the battery is fully charged.
Use double line rigging whenever possible.
Refer to
Double Line Rigging
on page 11.
3. Wear ANSI-approved safety goggles and
heavy-duty leather work gloves during operation.
4. Do not disengage clutch under load.
Engage clutch before starting.
5. Keep clear of fairlead when operating.
Do not try to guide wire rope.
6.
Do not place finger(s) through hook or shackle.
Fingers may be caught and get pulled into fairlead
or drum. Use included strap to hold hook instead.
