background image

Using the Programmer Software 

USING THE PROGRAMMER SOFTWARE 

Use the Programmer software to view and change the parameters that are currently programmed into the encoder, and 

program new parameters, if needed . You can also clear the encoder reading .

OTEE:

N

If you need help installing the software, see the instructions 

"Installing the Programmer Software" on page 20

.

1 .  Connect the IR programming and data profile cable (IR cable) to the serial port of the computer with the installed 

programming software .  

 

If the computer does not have a serial port, use a Serial-to-USB adapter . See the 

"Parts List" on page 5.

OTEE:

N

Connect the IR cable 

before

 you start the software to make sure the software recognizes the  

IR cable connection . 

2 .  Double-click the LCD Programmer shortcut to 

start the software application .  

 

The License Agreement displays the first time you 

access the software . 

Figure 4:  Software shortcut

3 .  Read the License Agreement and click 

Accept License .

OTEE:

N

The License Agreement must be accepted 

by an authorized representative of the 

customer/licensee . If you select Decline 

License, the application will not start .

The Splash (sign-in) screen displays (

Figure 6

) . The 

screen includes the software version, access to the 

license and trademarks information, and the User  

ID/Initials field . 

Figure 5:  Software license agreement

4 .  Enter your initials in the 

UserID/Initials

 field .  

A user ID of 3…7 characters is required to activate 

the OK button .
Then click OK .

OTEE:

N

Your sign-in initials are used in the product 

log file to record any changes you make to 

the LCD encoder .  

The software 

Programmer

 screen opens .

Figure 6:  Splash screen

Page 7 

May 2018

ENC-PM-02040-EN-03

Содержание HR-E LCD 4-20

























Отзывы: