Badger Meter HR-E LCD 4-20, Руководство программиста

Страница: 14 / 24

Programmer Parameters
Visual Reading and Encoder Output Fields
The Visual Reading* field is a read-only field that displays the current meter reading as a real number . The number of decimal
places is determined by the units and meter size . You cannot change this number .
The
Encoder Output* field is a read-only field that displays the reading resolution sent from the encoder . Changing the
Digits from Encoder field affects the Encoder Output field . See Figure 21 for an example of both fields .
*
For TSM (Turbo) 12…20 inch meters, the value shown in the Visual Reading field and Encoder Output field may not display correctly . The programming value,
however, is calculated correctly and will display correctly on the encoder .
Figure 21: Visual Reading and Encoder Output
Rate of Flow Units Field
The Rate of Flow Units field displays the unit by which the rate of flow is measured . The factory-programmed default is Gallon .
Click the drop-down menu to the right of the data field to select a Rate of Flow Units . The options are gallon, cubic meter,
liters, cubic feet and imperial gallon as shown in Figure 22 .
Figure 22: Rate of Flow Units
Page 14 May 2018 ENC-PM-02040-EN-03