Programming
Fluid Properties
From the
Fluid Properties
menu, you can set these parameters:
Parameter
Description
Ch 1 Fluid ID
Custom text entry for the fluid name�
Ch1 Fixed Viscosity (cSt)
Numeric entry for fluid viscosity, in centistokes�
Ch1 Fixed Density
Numeric entry for fluid density�
1� Navigate to
SYSTEM SETUP > ADVANCED SETUP > FLUID PROPERTIES
�
2� Highlight a parameter and press
ENTEO
�
3� Use the soft keys and numeric keypad to enter a value and press
ENTEO
to
save the value�
4� On the confirmation screen, press
ENTEO
to confirm the change�
Communications
From the
Communications
menu, you can set these parameters:
Parameter
Options
Network Type
Inactive, Modbus RTU or Modbus ASCII
Baud Rate
1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600
or 115200
Parity
No Parity, Odd Parity or Even Parity
Stop Bit
No Stop Bit, One Stop Bit or Two Stop Bit
Slave Address
[Edit screen]
Device Name
[Edit screen]
1� Navigate to
SYSTEM SETUP > ADVANCED SETUP > COMMUNICATIONS
�
2� Highlight a parameter and press
ENTEO
�
3� Highlight an option and press
ENTEO
�
4� Press
BACKSPACE
to return to the previous menu�
Page 36
July 2016
CTL-UM-01723-EN-01
