Badger Meter Dynasonics UHC100, Руководство пользователя

Страница: 15 / 52

OPERATING PROCEDURE
Control Button
The representation of measured and information data on the display is selected by the control button located on the upper
part of the electronic unit
Control
Button
Representation of Data
Data are displayed on a liquid crystal, 8-digit display with special symbols for the representation of parameters, units of
measurement, and Operating Mode s:
When the flow is flowing in the right direction, it is represented by a right arrow ; when the flow flowing in the opposite
direction, it is represented by a left arrow When there is no flow, no arrow is displayed The purpose of other symbols is
described in “Menu Structure” on page 16
This following information can be displayed:
• The values of the integral and instantaneous measured parameters when the symbol INT is displayed,
• The data of monthly archives and data of the reporting day when the symbol BIL is displayed,
• Information on the configuration of the device when the symbol INF is displayed
The consumed heat energy is displayed constantly Other data are represented on the display in a sequence with the use of
the control button
When the meter is configured for the installation in the supply line, the symbol
is displayed; when the meter is configured
for the installation in the return line, the symbol is displayed
The symbol is shown when there is a significant meter operation error (due to which the summing-up of energy or normal
working time is suspended) For the error code, see the LCD menu item 1 12 in “Menu Structure” on page 16
Operating Procedure
Page 15 November 2020 HYB-UM-03193-EN-02