background image

 

1.  Introduction 

DEAR CUSTOMER, We hope your new tool brings you much enjoyment and success. 
NOTE: 

According to the applicable product liability laws, the manufacturer of the device does not assume liability 
for damages to the product or damages caused by the product that occurs due to: 

Improper handling, 
Non-compliance of the operating instructions, 
Repairs by third parties, not by authorized service technicians, 
Installation and replacement of non-original spare parts, 
Application other than specified, 

WE RECOMMEND: 

Read  through  the  complete  text  in  the  operating  instructions  before  installing  and  commissioning  the 
device. The operating instructions are intended to help the user to become familiar with the machine and 
take  advantage  of  its  application  possibilities  in  accordance  with  the  recommendations.  The  operating 
instructions  contain  important  information  on  how  to  operate  the  machine  safely,  professionally  and 
economically, how to avoid danger, costly repairs, reduce downtimes and how to in-crease reliability and 
service life of the machine. 
In  addition  to  the  safety  regulations  in  the  operating  instructions,  you  have  to  meet  the  applicable 
regulations  that  apply  for  the  operation  of  the  machine  in  your  country.  Keep  the  operating  instructions 
package with the ma-chine at all times and store it in a plastic cover to protect it from dirt and moisture. 
Read the instruction manual each time before operating the machine and carefully follow its information. 
The  machine  can  only  be  operated  by  persons  who  were  instructed  concerning  the  operation  of  the 
machine  and  who  are  informed  about  the  associated  dangers.  The  minimum  age  requirement  must  be 
complied with. 

 

2.  Scope of delivery 

Open the packaging and take out the equipment with care. 
Remove the packaging material and any packaging and/or transportation braces (if available). 
Check to see if all items are present. 
Inspect the equipment and accessories for transport damage. In case of complaints the supplier is to 

be informed immediately. Complaints received at a later date will not be acknowledged. 

If possible, keep the packaging until the end of the guarantee period. 

 

• Read the operating instructions to make yourself familiar with the device prior to using it. 

After that, please dispose of it in an environmentally friendly way. 

 

•  Only  use  original  parts  for  accessories  as  well  as  for  wearing  and  spare  parts.  Spare  parts  are 
available from your specialized dealer. 

Important! 

The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small 
parts. There is a danger of swallowing or suffocating! 

 

3.  Intended use 

The machine meets the currently valid EU machine directive. 

Before starting any work, all protective and safety devices must be in place. 
The blower is designed to blow leaves as well as lawn debris such as grass clippings and small twigs. 

It is not to be used for any other purpose. 

The device is only to be used on dry surfaces. 
The machine has been designed to be operated by just one person. 
The operator is responsible for third parties in the area of operations. 
All safety and hazard notices on the machine must be observed. 
All safety and hazard notices on the machine must be kept in a completely legible condition. 
Use the machine in a technically flawless condition only, as well as for its intended purpose, in a safe 

manner and being aware of dangers, in compliance with the operating instructions! 

Disruptions which can affect safety in particular must be eliminated straight away! 

Содержание EB943



















Отзывы: