PAGE 20
SECTION 12:
DRIVE BELT
To access the rear of the pump plate, loosen the nuts holding the rear cover in place 1 ½ turns using a 9/16
wrench. Once loosened slide the rear cover rearward until it stops. Then the rear cover will pivot down giving
access to the pump belts, clutch, and oil filter.
The Renegade drive belt utilizes a two-belt system with auto adjusting tensioners. The use of a 3/8 ratchet and
short extension may be required for installation or removal of a drive belt.
Fig. 13
Fig. 14
Fig. 15
Pump
Pulley
Pump
Pulley
Clutch
Drive Belt
Tensioners
Содержание RENEGADE Series
Страница 1: ...2021 Renegade Gas...
Страница 36: ...PAGE 36 2021 Commercial...