Bad Boy RENEGADE Series, Руководство по обслуживанию

Страница: 4 / 36

PAGE 4
SECTION 1: BASIC INFORMATION
Congratulations on the purchase of your new Bad Boy Mower! The purpose of this manual is to assist
operators in maintaining and operating their mower. The information and instructions in this manual can help
you in realizing many years of performance from your new Bad Boy. Also, check out our website to learn more
about the Bad Boy family at www.badboymowers.com ..
WARRANTY REGISTRATION
The Warranty Registration form must be completed within 30 days to validate your warranty. As the new
equipment owner, you are expected to see that the registration form is completed by the selling dealer at time
of delivery. Warranty registration should be completed by the selling dealership using the on-line
registration site. Warranty is nontransferable.
MODEL/SERIAL NUMBER
Your mower model and serial numbers are printed on a decal located underneath the seat. The entire alpha-
numeric code is your serial number, to find your model number, leave the last eight digits off of the serial
number. When the time comes, these numbers are necessary for ordering parts.
PARTS/SERVICE
Bad Boy recommends using Bad Boy replacement parts on your mower. Replacement parts are available
through your local Bad Boy Mowers Dealer. Remember to have the following information close when ordering
parts:
1. Part number
2. Serial number
All warranty repair and service must be handled through your authorized Bad Boy dealer. To locate the nearest
dealer, go to the website listed above and click on “Locate a Dealer.”
EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
Federal Evaporative Emission Control Warranty: Your Warranty Rights and Obligations
The Environmental Protection Agency (EPA), and Bad Boy Inc. are pleased to explain the evaporative emission
control system's warranty on your 2021 equipment. New equipment that uses spark ignition engines for off-
road use must meet stringent anti-smog standards. the evaporative emission control system on your
equipment is designed, built, and equipped so it conforms at the time of sale to the ultimate purchaser with the
requirements of 40 CFR 1060. The evaporative emission control system is free from defects in materials and
workmanship that may keep it from meeting said requirements. Bad Boy Inc. must warrant the evaporative
mission control system on your equipment for two years provided there has been no abuse, neglect, or
improper maintenance. If an evaporative emission control system component does fail in a manner that would
cause the equipment to no longer meet the requirements of 40 CFR 1060 within the first two years Bad Boy Inc.
will replace the defective component. Your evaporative emission control system may include parts such as fuel
tanks, fuel lines, carbon canisters, fuel caps, valves, vapor hoses, clamps, or connectors.