Bad Boy Outlaw Stand-On BBS 3600, Руководство владельца, обслуживания и запасных частей

Страница: 20 / 56

11) Install and torque the top port plugs to 180 in. lbs.
(20.3 Nm).
12) Continue to fill the transaxle through the hydraulic
fluid reservoirs until the “Full Cold” line is reached
on the hydraulic fluid reservoirs.
13) Re-install the caps on the hydraulic fluid reservoirs.
14) Now we need to purge the air from the transaxle.
With your mowers tires off the ground disengage
the brake and start the engine.
15) Pull the neutral bypass levers which are located on
each side of the muffler. Then slowly move the
drive arms in the forward and reverse direction 5 to
6 times.
16) Push the neutral bypass levers back into place.
Move the drive arms forward and backward 5 to 6
times slowly. Check the oil level, and add oil
as required after stopping the engine.
17) It may be necessary to repeat steps 15 and 16
until all the air is completely purged from the
system. When the transaxle operates at normal
noise levels and moves smoothly forward and
reverse at normal speeds, then the transaxle is
considered purged.
T
he neutral rods also allow you disengage the
transaxles and move the mower without the engine
running.
PAGE
20