Bad Boy Outlaw Stand-On BBS 3600, Руководство владельца, обслуживания и запасных частей

Страница: 14 / 56

SECTION 7: CONTROLS
7.1 Ignition Switch—Bad Boy Mowers have a three position ignition switch: off, run, and start.
With key inserted, rotate it clockwise to START position and release key when engine starts,
and switch will automatically return to he RUN position.
7.2 Throttle Control—A cable is connected to the engine throttle for controlling engine speed.
Move lever forward to increase engine rpm, move lever backward to decrease engine rpm.
7.3 Choke Control—A cable is linked to manually operate the engine choke. When the lever is
in the down position, the choke is in the off (run) position. When the lever is pulled up, the
choke is in the on (start) position. Do not operate the machine in the on (start) position. The
choke lever on the driver’s left side, next to the seat.
7.4 Control Levers—These levers control the mower’s speed, direction, and neutral lock. These
levers are used to steer, accelerate, decelerate and change direction. (Drive Arms)
7.5 Blade Engage Switch—This switch engages the blades. Pull the switch up to engage the
blades and push the switch down to disengage the blades.
7.6 Parking Brake—To engage the parking brake pull the handle up and rearwards. To
disengage, depress the thumb button and place the handle in its forward-most position.
7.7 Deck Lift Lever— The deck height is controlled by the lever and set with a removable pin
(as shown in the photograph). To raise the deck to its highest position, pull the lever to
its rearward stop. The deck and lever will lock in this position. Choose the deck height by
inserting the pin into the hole that corresponds to the desired cutting height. Standing on the
operator’s platform, quickly pull back on the lever; this will disengage the locking mechanism
and allow the lever to move forward until the chosen cut height is reached.
7.4
7.2
7.1
7.6
7.3
7.5
7.7
PAGE
14