Bad Boy Mowers OUTLAW, Руководство владельца, обслуживания и запасных частей

Страница: 42 / 72

PAGE 42
SECTION 5: FRAME
The front fork nuts require a torque of 40ft-lbs. While
applying this torque, turn the fork itself to ensure no
damage is done to the bearing. This operation is only
necessary if a repair requires it.
Torque rear wheel lugs to 65-75 ft. lbs. Re-torque at
every oil change and check at every mowing.
There are two grease zerks located on each of the two
turnbuckles (4 Total). Grease at every oil change.
The pump belt tensioner is located under the engine and
has a grease fitting at its pivot point. Grease at every
engine oil change.
The deck belt tensioner is located at the rear of the deck
and has a grease fitting on its pivot point. Grease at every
engine oil change.
The control arm blocks have grease fittings located on
the top of each block. Grease one time a year.