background image

Engine Power Rating Information: 

The gross power rating for individual gas engine models is labeled in accordance with

SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perform-
ance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a
variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.

Common Service Parts

Part Number

Blade Control Cable

7100641YP

Wheel Drive Control Cable

7104004YP

Cutter Blade (Double Wave)

7100242AYP

Drive Belt

7100883YP

Product Specifications

Deck Size (in)

21

Height of Cut (in)

1.25 - 4 

Transmission Type

Gear

Ground Speed (mph)

0 - 4

Engine Power (gross torque)

8.75

Engine Displacement (cc)

190

Fuel Tank Capacity (qt)

1.2

20

www.badboymowers.com

1-877-370-7504

21” VARIABLE SPEED 
SWIVEL WHEEL
WALK BEHIND 
MOWER

Not 

for  

Reproduction

Содержание 7800670





















Отзывы: