Rear Cover Removal and Installation
To Remove the Rear Cover
1. Remove the six threaded fasteners
(A, Figure 22)
securing the rear cover to the machine.
2. Lift the cover
(B)
from the machine. Set the components
aside.
To Install the Rear Cover
1. Place the cover
(B)
onto the rear of the mower, aligning
the holes in the cover with the holes in the mower.
2. Secure the cover to the mower with the threaded
fasteners
(A)
.
WARNING
DO NOT attempt any maintenance, adjustments or service
with engine and blade running. STOP engine and blade.
Disconnect spark plug wire and secure away from spark
plug. Engine and components are HOT. Avoid serious
burns, allow sufficient time for all components to cool.
!
!
B
Figure 22: Removing the rear cover
A
16
Maintenance
www.badboymowers.com
Maintenance (Continued)
ITEM
SERVICE
PERFORMED
REF.
EACH
USE
5
HRS
25
HRS
50
HRS
100
HRS
EACH
SEASON
Engine Oil
Check Oil Level
Page 7
X
Initial Oil Change
Page 11
X
Periodic Oil Change
Page 11
X*
Air Pre-Cleaner
Clean Sponge Element
Engine Manual
X**
Air Cleaner
Clean or Replace
Engine Manual
X**
Spark Plug
Replace
Engine Manual
X
Engine Cooling
System
Clean Shroud & Fins
Engine Manual
X**
Drive Belt
Check for Wear and
Tension
Page 11, 15
X
X
X
Mower Blade
Check for wear, Damage
& Replacement
Page 13
X
Mower Deck
Clean Debris
Accumulation
Page 7
X
Wheel Drive
Components
Clean Debris
Accumulation; Check
for Wear or Damage
Page 12
X
Transmission
Clutch Cable
Spring Adjustment
Check & Adjust
Page 14
X
X
X
* Change oil every 25 hours when operating under heavy load or high temperatures.
** Clean more often under dusty conditions or when air debris is present.
Service Schedule
Not
for
Reproduction
