background image

60

LIMITED CONDITIONAL WARRANTY*
Backyard Storage Solutions, LLC warrants the following:
1.

Every product is warranted from defects in workmanship and manufacturing for 1 year.

2.

All accessories, hardware and metal components are warranted for 2 years.

3.

LP Prostruct® Flooring is warranted for 10 years

4.

All Oriented Strand Board (OSB) is warranted for 2 years

5.

Siding and Trim is warranted for 15 years.

6.

Solar Shed windows are warranted for 1 year.

7.

Cedar lumber is warranted for 15 years.

8.

Preserved Pine is warranted for 10 years.

Backyard Storage Solutions, LLC will repair, replace or pay for the affected part.  In no event shall Backyard Storage Solutions, LLC 
pay the cost of labor or installation or any other costs related thereto.  All warranties are from date of purchase.  If a cash refund is paid 
on an affected part, it will be prorated from the date of purchase.

CONDITIONS
The warranty is effective only when:
1.

The unit has been erected in accordance with the assembly instructions.

2.

The unit has been properly shingled and painted or stained and reasonably and regularly maintained thereafter.

3.

The failure occurs when the unit is owned by the original purchaser.

4.

Backyard Storage Solutions, LLC has received the warranty registration card within thirty (30) days of purchase and
notification of the failure in writing within the warranty period specified above.

5.

Backyard Storage Solutions, LLC has had reasonable opportunity during the sixty (60) days following receipt of notification to
inspect and verify the failure prior to commencement of any repair work.

REQUIREMENTS
Storage Buildings
To validate your warranty, it is necessary to properly maintain your Backyard Storage Solutions, LLC unit; shingle the roof and paint or 
solid-colored stain the siding using quality, 100% acrylic latex exterior product with a minimum of two (2) coats within thirty (30) days of 
assembly; caulk above all doors and all horizontal and vertical trim boards; paint and seal all exposed edges, sides and faces of 
siding/trim and OSB siding to include all exterior walls and all sides and all edges of doors.  

Gazebos & Pergolas
To validate your warranty, it is necessary to properly maintain your Backyard Storage Solutions, LLC unit.  This includes treating all of 
the exposed cedar and pine surfaces on your gazebo or pergola structure with an exterior grade wood preservative, an exterior 
oil-based semi-transparent stain, an acrylic latex exterior paint or an acrylic latex solid color exterior stain within 30 days of assembly 
and as needed thereafter to maintain your warranty.

Keep vegetation trimmed away from building and make sure siding panels and trim do not come in contact with masonry or cement.  
The minimum ground clearance for siding must be one half inch (½ inch) from concrete slab or two and one half inches (2 ½”) from the 
ground when building is erected or constructed on a treated wood floor kit. Water from sprinklers must be kept off unit. In no event will 
Backyard Storage Solutions, LLC be responsible for any indirect, incidental, consequential or special damages nor for failure(s) that 
are caused by events, acts or omissions beyond our control including, but not limited to, misuse or improper assembly, improper 
maintenance (which eventually leads to rot or decay) and acts of God. Backyard Storage Solutions, LLC will not be held responsible for 
any labor costs incurred to construct your unit.
This warranty gives you certain specific rights that vary from state to state.

CLAIM PROCEDURE
To make a claim under this warranty, you can either call 1-888-827-9056 or email: [email protected].  
Please have ready the information below when you call or include the information in your email:
1.

The model and size of the product.

2.

A list of the part(s) for which the claim is made.

3.

Proof of purchase of the Backyard Storage Solutions, LLC item, as shown on the original invoice.

4.

Run code: found on exterior product label or assembly instructions enclosed in the product package.

All other inquiries can be mailed to:

Backyard Storage Solutions, LLC
Attn: Customer Service
1000 Ternes
Monroe, MI 48162

*WARRANTY TERMS MAY VARY OUTSIDE THE U.S.A.

IMPORTANT:  This is your warranty certificate.

YDL LDR: 07/27/2016

WARRANTY REGISTRATION
Please complete your warranty registration to properly validate your warranty.
Register your product online at:www.OnlineWarranty.net.

Содержание YardLine ASTON





























































Отзывы: