48"
(121,9 cm)
3/4"
(1,9 cm)
4"
(10,2 cm)
3/4"
(1,9 cm)
12"
(30,5 cm)
6"
(15,2 cm)
15
For squareness maintain 3/4"
measurement along panel edges.
BACK WALL PANELS
48 x 72"
(121,9 x 213,4 cm)
PARTS REQUIRED:
x1
x45
2" (5,1 cm)
Fig. B
BEGIN HERE
Fig. A
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
DOOR
Place
48 x 72"
panel onto wall frame flush to top of frame with primed side up as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud. Secure panel with
two 2" nails in the corners
(Fig. A)
.
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have
a 3/4" measurement on the wall stud. Secure corner with two 2" nails
(Fig. B)
.
4
5
3
3/4" GAUGE
BLOCK
GAA
3/4" GAUGE
BLOCK
Primed
side up
