9
To operate, you will need one precision-filled standard grill LP gas tank with external valve threads .
20 lb
9 Kg
17.9 in.
/ 45.5 cm
12.2 in. / 31 cm
Securing LP Gas Tank
Secure tank by sliding the tank retainer wire over shoulder of LP gas tank .
Inserting LP Gas Tank
Place precision-filled LP gas tank upright into the notches in the right cart frame so the tank
valve is facing the gas line connection .
Connecting LP Gas Tank
1 . Before connecting, be sure there is no debris caught
in the head of the LP gas tank, head of the regulator
valve or in the head of the burner or burner ports .
2 . Connect regulator/hose assembly to tank by turning
knob clockwise until it stops .
Disconnecting LP Gas Tank
1 . Before disconnecting, make sure the LP gas tank valve is “CLOSED .”
2 . Disconnect regulator/hose assembly from LP gas tank by turning knob counterclockwise
until it is loose .
W
CAUTION: LP gas tank must be properly disconnected and removed
prior to moving this grill.
3 . Place the protective cap cover on the LP tank and store the tank outdoors in a well
ventilated area out of direct sunlight .
Checking for Leaks
Burner Connections
1 . Make sure the regulator hose and valve connections are securely fastened to the burner and the
tank .
2 . Visually check the connection between the burner/venturi tube and orifice .
3 . Make sure the burner/venturi tube fits over the orifice .
W
WARNING: Failure to inspect this connection or follow these instructions
could cause a fire or an explosion which can cause death, serious bodily
injury or damage to property.
4 . Please refer to diagram for proper installation (Figure 1) .
5 . If the burner/venturi tube does not rest flush to the orifice, as shown .
Tank/Gas Line Connection
1 . Make 2-3 oz . of leak detection solution by mixing one part liquid dishwashing soap with three
parts water .
2 . Make sure control knobs are in the “ OFF” position (Figure 2) .
3 . Connect LP gas tank per “Installing LP Gas Tank” section .
4 . Turn LP gas tank valve to “OPEN .”
NG:
Turn “ON” natural gas main valve .
Operating Instructions
Figure 1
LP Gas Valve
with Orifice
Valve
Soft Pipe
Connection
Burner/
Venturi
Tube
Figure 2
OFF
ARRÊT
Figure 3
X
X
X
X
X
Figure 4
Installing LP Gas Tank
.
W
LP gas tank must be properly disconnected and
removed prior to moving this grill.
CAUTION
Getting More Propane
Need a tank of gas? One option is to try propane exchange . It’s easy, fast, safe, and available
at tens of thousands of conveniently located retail outlets nationwide, which are typically
open nights and weekends . You can purchase a fresh, precision-filled tank or exchange your
empty for a fresh, precision-filled tank . Another option is to have your tank refilled at a refill
station . Be sure to check the hours of operation for the refill station .
Installing Natural Gas Line
Installation should be done by a qualified service person .
W
CAUTION: If young children are in the area, a locking valve should be considered.
Connecting Natural Gas Line
1 . Before connecting, be sure there is no debris caught in the head of the natural gas line, head of the grill natural gas line or in the head of the
burner or burner ports .
2 . Connect grill natural gas line to natural main gas line .
Disconnecting Natural Gas Line
1 . Before disconnecting, make sure the natural gas main line valve is “OFF .”
2 . Disconnect grill natural gas line from natural gas main line .
X
X
