Backyard Products Yardline AUBURN GABLE, Руководство пользователя, Страница: 55 / 69

53
GABLE FASCIA
x20
2" (5,1 cm)
3/8 x 3-1/4 x 5-7/8" (1 x 8,3 x 14,9 cm)
x2
SHIM
2
On rear gable end, position two 3-1/4 x 5-7/8"
SHIMS (Fig. A)
.
Secure using two 2" finish nails flush to side fascia and soffit, as shown.
Repeat to install shim on opposite side.
Position fascia with primed side out, flush at peak and to roof panels as shown (Fig. B, C) .
Secure using 2" finish nails spaced evenly as shown.
Repeat Step 2 to attach fascia boards on the front side.
(Front side is without 3-1/4 x 5-7/8" shims.)
3
You have finished installing your back gable fascia.
FINISH
1
BEGIN
Hint: Pre-set nails in fascia
before final installation.
PARTS REQUIRED:
x2
3/8 x 4-3/4 x 62-3/8" (1 x 12,1 x 158,4 cm)
x2
3/8 x 4-3/4 x 62-3/8" (1 x 12,1 x 158,4 cm)
Primed Side Out
Fig.B
Fig. C
Flush
Flush at peak.
SPACED EVENL
Y
Flush with top of OSB roof panels
2" (5,1 cm) Finish Nails
x8 per each board.
2" (5,1 cm)
Finish Nails
x2 per side
Painted Red
Painted Green
Flush
Fig. A
SHIM