![background image](http://html1.mh-extra.com/html/backyard-products/yardline-auburn-gable/yardline-auburn-gable_manual_3364611046.webp)
44
FRONT GABLE ASSEMBLY
PARTS REQUIRED:
CQA
3"
(7,6 cm)
Screws
x1
Front Gable
Measure 1-1/2" down from top plate and mark at each side as shown. Set gable unit on top plate.
Hold secure with one 2" nail on each side as shown in
(Fig. A)
.
1
BEGIN
Attach gable unit on front wall top plate.
BE SURE GABLE IS CENTERED ON WALL BEFORE NAILING.
2
Continue nailing lower edge of panels into top plate using 2" nails 6" apart as shown
in
(Fig. A)
You have finished attaching your gable units.
FINISH
2" (5,1 cm)
x76
Fig. B
TOP PLATE
CQA
3"
(7,6 cm)
Screws
6"
(15,2 cm)
Fig. A
TOP PLATE
1-1/2"
(3,8 cm )
Measure and
Mark
1-1/2"
(3,8 cm )
Measure and
Mark
On the inside, secure gable unit with 3" screws toe-screwed into
CQA
at an angle as shown in
(Fig. B)
.
Repeat
Steps 1-3
for the Rear Gable Assembly.
3
4
3" (7,6 cm)
x4
x1
Rear Gable
NAIL FIRST
2" (5,1 cm)
NAIL FIRST
2" (5,1 cm)
Содержание Yardline AUBURN GABLE
Страница 2: ...This page intentionally left blank...