![background image](http://html1.mh-extra.com/html/backyard-products/yardline-auburn-gable/yardline-auburn-gable_manual_3364611016.webp)
14
PARTS REQUIRED:
FINISH
You have finished rafter jig. Proceed to assemble your rafters.
RAFTER ASSEMBLY
96"
(243,8 cm)
3/4"
(1,9 cm)
CLA x2
3" (7,6 cm)
x4
x2
CLA
2 x 4 x 4-7/8" (5,1 x 10,2 x 12,4 cm)
BEGIN
¸
1
Secure one
CLA
flush to the floor deck using two 3" screws.
Measure over 96-3/4" and install a second
CLA
flush to the floor deck.
CLA
will overhang the floor.
Secure using two 3" screws.
96-3/4"
(245,7 cm)
IMPORTANT MEASUREMENT !!
Fig. B
Fig. A
It is very important to assemble your rafters using the following method for an even and flat roof.
You will build a rafter jig using the floor and two
CLA
parts as shown.
Floor Width
(2) 3" (7,6 cm)
Screws
in each CLA
There will be an
overhang on
this end.
Flush
Flush
Содержание Yardline AUBURN GABLE
Страница 2: ...This page intentionally left blank...