Backyard Products Heartland CATALINA, Инструкция по сборке

Страница: 27 / 29

25
2" (5,1 cm)
x32
ONCE MOUNTING HARDWARE IS INSTALLED, FOLLOW THE STEPS BELOW TO INSTALL
POST SKIRT
E.
1 2 3
4 5
E x8
Counter-sink all nail heads.
When using post mounting hardware, there will be interference from protruding screws or nail
heads. Using a scrap piece of scrap wood (not included) and a Hammer, gently tap the wood
and Post Skirt against the mounting hardware to leave reference marks on the back side of the
Post Skirt
(Fig. 1,2) .
Use a hand tool to remove wood at marks (Fig. 5) .
Secure using four 2" (5,1 cm) fi nish nails for each post skirt.
POST SKIRTS
PARTS REQUIRED:
E
x8
7/8 x 3-3/8 x 11-7/8" (2,2 x 8,6 x 30,2 cm)
E
E
1
BEGIN
2
FINISH
3