Backyard Products Heartland CATALINA, Инструкция по сборке

Страница: 9 / 29

7
4
5
Orient two J rafters as shown on fl at surface with angled edge down.
RAFTERS
J
x2
1-3/8 x 5-3/8 x 138" (3,5 x 13,7 x 350,5 cm)
L
x20
1-3/8 x 3-3/8 x 8-1/2" (3,5 x 8,6 x 21,6 cm)
Flush
(2) 3" (7,6 cm) Screws
PARTS REQUIRED:
J x2
J x2
Fig. A
Fig. B
Fig. C
Flush
L x20
Center rafter ends L on marks and fl ush to top as shown (Fig. B, C) .
Pre-drill 1/8" (0,3 cm) holes through rafter at marks.
Secure rafter ends fl ush to top of rafter using two 3" screws per rafter end.
Marks holes on face of rafter centered on marks as shown (Fig. A) .
6
7
FINISH
8
3" (7,6 cm)
x40
3/4" (1,9 cm)
2" (5,1 cm)
Centered
on marks.
Center
on marks.
1/8" (0,3 cm)
Drill Bit
NOTE:
Angle down