STEP 9: RAFTERS
9.1 - RAFTERS ARE SPACED 32" CENTER TO CENTER.
TOP OF HEADERS ARE PRE-MARKED WITH DOUBLE LINE TO
SHOW PLACEMENT LOCATION OF EACH RAFTER.
NOTE:
INSTALL FIRST AND LAST RAFTER AND USE A STRING LINE ACROSS TAILS TO LINE UP ADDITIONAL RAFTERS.
9.1 - LAY REMAINING RAFTERS AND SECURE WITH 6" SCREWS BY GOING DOWN THROUGH THE PREDRILLED
HOLE IN RAFTER AND SECURING TO THE FRONT AND REAR HEADER AS SHOWN BELOW.
RAFTER
CHALK LINE
RAFTER
22"
OVERHANG
FROM OUTSIDE
HEADER
6" SCREW
32"
32"
32"
32"
6" SCREW
15
