M78
(x2)
CENTER SLIDE BRACE
055
(x1)
SLIDE RAIL 8' GREEN LEFT
054
(x1)
SLIDE RAIL 8' GREEN RIGHT
090
(x24)
SCREW - 2 1/2"
CENTER SLIDE BRACE - W4L08749
5/8"x3 3/8"x17 1/4" (16x86x438)
M78
(x2)
SCREW PFH
8x2 1/2"
(x24)
H100090
SLIDE RAIL 8' GREEN RIGHT
(x1)
A100054
SLIDE RAIL 8' GREEN LEFT
(x1)
A100055
NOTE:
USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD
BE 12 INDENTIONS ON EACH RAIL.
PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL
ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE BED INO THE
CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL.
INSERT THE TWO CENTER SLIDE BRACES INTO THEIR RESPECTIVE LOCATIONS. SECURE THE SLIDE BED AND CENTER
USING THE PROVIDED HARDWARE.
REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.
TIP:
A HELPER IS REQUIRED FOR THIS STEP.
SLIDE ASSEMBLY
STEP 2
34