STEP 1
LAY ONE E1 AND 0NE E3 FORT UPRIGHT FLAT ON GROUND.
ATTACH K1 BASE BOARD TO E1 AND E3 FORT UPRIGHTS USING (4) 1- 1/2" BOLTS, LOCK
WASHERS AND 7/8" BARREL NUTS.
ATTACH N1 SWING BLOCK TO E1 AND E3 FORT UPRIGHTS USING (2) 1-1/2" LAG SCREWS
AND LOCK WASHERS.
ATTACH H1 LEFT FLOOR RAIL AND H5 FLOOR SUPPORT TO E1 AND E3 FORT UPRIGHTS
USING (4) 2-3/4" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS.
ATTACH L1 LEFT WALL RAIL TO E1 AND E3 FORT UPRIGHTS USING (4) 1- 1/2" BOLTS,
LOCK WASHERS AND 7/8" BARREL NUTS.
STEP 2
LAY ONE E2 AND 0NE E3 FORT UPRIGHT FLAT ON GROUND.
ATTACH K1 BASE BOARD TO E2 AND E3 FORT UPRIGHTS USING (4) 1- 1/2" BOLTS, LOCK
WASHERS AND 7/8" BARREL NUTS.
ATTACH H2 RIGHT FLOOR RAIL AND H5 FLOOR SUPPORT TO E2 AND E3 FORT UPRIGHTS
USING (4) 2-3/4" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS.
ATTACH L2 RIGHT WALL RAIL TO E2 AND E3 FORT UPRIGHTS USING (4) 1- 1/2" BOLTS,
LOCK WASHERS AND 7/8" BARREL NUTS.
BOLT WH
5/16x1-1/2
(8)
BOLT WH
5/16x2-3/4
(4)
WASHER
LOCK EXT
8x19
(12)
WASHER
LOCK EXT
12x19
(12)
NUT BARREL
WH 5/16x7/8
(12)
BOLT WH
5/16x1-1/2
(8)
BOLT WH
5/16x2-3/4
(4)
LAG SCREW
WH 5/16x1-1/2
(2)
WASHER
LOCK EXT
8x19
(14)
WASHER
LOCK EXT
12x19
(12)
NUT BARREL
WH 5/16x7/8
(12)
E3 - TOWER LEG - W100553
1 3/8"x3 3/8"x74" (36x86x1880)
K1 - BASE BOARD - W100562
5/8"x5 1/4"x63 7/8" (16x134x1624)
N1 - SWING BLOCK - W100588
5/8"x2 3/8"x63 7/8" (16x60x1624)
H1 - LEFT FLOOR RAIL - W100557
1"x3 3/8"x63 7/8" (24x86x1624)
L1 - LEFT WALL RAIL - W102360
5/8"x4 3/8"x63 7/8" (16x112x1624)
H2 - RIGHT FLOOR RAIL - W100558
1"x3 3/8"x63 7/8" (24x86x1624)
L2 - RIGHT WALL RAIL - W100567
5/8"x4 3/8"x63 7/8" (16x112x1624)
H5 - FLOOR SUPPORT - W100598
1"x3 3/8"x3 3/8" (24x86x86)
E1 - TOWER LEG - W102885
1 3/8"x3 3/8"x90 1/2" (36x86x2298)
E2 - TOWER LEG - W102884
1 3/8"x3 3/8"x90 1/2" (36x86x2298)
THIS EDGE PILOT HOLE SHOULD
FACE OUTWARD AND BE AT THE
TOP OF THE BOARD FOR PROPER
ORIENTATION DURING ASSEMBLY.
THE EDGE PILOT HOLE SHOULD
FACE OUTWARD AND BE AT THE
TOP OF THE BOARD FOR PROPER
ORIENTATION DURING ASSEMBLY.
