Backfire F5F, Руководство пользователя

Страница: 15 / 23

BackfireF5F Page 15
3.2 Cabels of servos and servoholder
We shorten the servos´cabels up to 4cm of distance. We solder the pins from the crushing
bar on the servos´cabels pulled through the wing. Or we can crimpen the original pins from
the servo-connector. We prepare the septa from plywood 1,5mm for each servo.
Picture 11: The cables of servos and septa of servos
3.3 Connectors Wing/Fuselage
In case we work with the three-piece wing, we have to solder the connectors into wings
first and then we glue up them with an epoxide glue. After this the next work procedure is
the same like working with the one-piece wing.
Picture 12: The connector for aileron of three-piece wing