background image

MGC 100/200

 Instruction 

0019-9322

A

Instruction 0019-9322

WARRANTY

Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from 
defects in mater ial and manufac ture and will conform substan tially to Bacharach Inc.’s 
ap plicable specifi cations. Bacharach’s liability and Buyer’s remedy under this warranty 
are limited to the repair or replacement, at Bacharach’s option, of this Product or parts 
thereof returned to Seller at the factory of manufac ture and shown to Bacharach Inc.’s 
reasonable satisfaction to have been defective; provided that written notice of the defect 
shall have been given by Buyer to Bacharach Inc. within one (1) year after the date of 
delivery of this Product by Bacharach, Inc.

Bacharach, Inc. warrants to Buyer that it will convey good title to this Product.  Bacha-
rach’s liability and Buyer’s remedy under this warranty of title are limited to the removal 
of any title defects or, at the election of Bacha rach, to the replacement of this Product or 
parts thereof that are defective in title.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED 
IN LIEU OF (I) ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHAN TABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE: AND (II) ANY OBLIGA TION, LIABILITY, 
RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT, WHETHER OR NOT ARISING 
FROM BACH A RACH’S NEGLIGENCE, ACTUAL OR IMPLIED. The remedies of the 
Buyer shall be limited to those provided herein to the exclusion of any and all other rem-
edies includ ing, without limita tion incidental or consequen tial damages.  No agree ment 
varying or extending the foregoing warranties, remedies or this limitation will be binding 
upon Bacharach, Inc. unless in writing, signed by a duly authorized offi cer of Bacharach.

Notice:

Product improvements and enhancements are continuous, therefore the specifi cations and information con-
tained in this document may change without notice. 

Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in con-
nection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language without the prior 
written consent of Bacharach, Inc.

BACHARACH

®

 is a registered trademark of Bacharach, Inc.

All other trademarks are the property of their respective owners.
Copyright © 2010, Bacharach, Inc., all rights reserved.

Register Your Warranty by Visiting 

www.mybacharach.com

Содержание MGC200























Отзывы: