For technical assistance call
1
NA / LATAM
// 704.752.6513 • 888.55.INVUE
EMEA
// +31.23.8900150
APAC
// +852.3127.6811
S3100V Sensors & Stand
1
Enrolling Sensors:
Locate the code on the sensor.
2
Within the InVue LIVE app, use the
camera on your device to scan the
code and enroll the sensor. Fill out
the information for the sensor and
the device that will be displayed.
3
Sensor Installation:
Place the adapter appropriate for
your fixture onto the sensor. The
Product Availability hangbar
adapter is shown below.
4
Plug the power connector on the
sensor into the device.
IMPORTANT! Do NOT remove
the red tab at this time!
5
Ensure that the sensor sits
squarely on the device.
6
While holding the sensor in place
with one hand, pull the red tab to
expose the adhesives.
7
Peel the clear film from the
adhesive.
8
Stand Installation:
To install the stand, begin by using
the provided alcohol wipe to clean
the area where the stand will be
placed. Allow it to dry completely.
