Bacharach MGC200, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 22

MGC 100/200
Instruction 0019-9322
Activate the peak-reading mode by pressing and holding the f
3
button for
3 seconds. Once in the peak-reading mode, toggle the display between
“peak CO2” and “peak CO” by momemtarily pressing the f
3
button.
peakCO2 peakCO
1,530 200
To return the instrument to its current-reading mode, again press and
hold the f
3
button for 3 seconds.
To reset the peak gas readings back to the current readings, switch the
instrument OFF and then back ON.
2.7 Storing Readings
There are two data storage modes availiable:
• Snapshot
• Continuous Data Logging
Readings can be stored by either saving the currently displayed reading
(MGC 100 and 200), or starting a continuous data-logging process that
saves the readings at predetermined intervals (MGC 200 only).
The stored data can later be downloaded to a personal computer for
analysis using the instrument’s IrDA link and the optional BACH-
COM software. This software can also be used to alter the data-logging
interval, and save the data to a fi le for further analysis.
The procedures for storing gas readings for both the MGC 100 and 200
are described in Sections 2.7.1 and 2.7.2.
2.7.1 MGC 100 – Snapshot
After obtaining a steady reading, momentarily press the f
1
button to
store (take a snapshot of) the reading shown on the display along with
the current time and date.
f
3
N2O %
28.7
Clock icon is displayed once for
a snapshot.
6