Bacharach HI FLOW Sampler, Инструкция

Страница: 26 / 72

Operation Hi Flow Sampler
Instruction 0055-9017
22
3.15 Access Records
Note:
Send Records can only be selected if operating in the Expanded Menu
Mode. Refer to Section 3.8.
Selecting Access Records from the Expanded Menu System allows a
user to either: 1) send all saved records to a personal computer, 2) view
the records on the unit’s LCD screen, or 3) erase all saved records.
3.15.1 Send Records
All the measured and calculated values that were saved in memory can
be downloaded to a personal computer as comma-delimited ASCII text,
which can later be imported into most spreadsheet programs for
analysis.
The following describes how to download saved records to a computer
that is running Windows
®
HyperTerminal as the communications
program. If a different operating system and/or communications
program is being used, then please consult the appropriate instruction
manuals for those products.
Note:
Send Records can only be selected if operating in the Expanded Menu
Mode. Refer to Section 3.8.
1. Install serial data cable P/N 104-4027 (straight through, 6 foot, DB9
male to DB9 female) between the computer’s COM port and the Hi
Flow’s COMPUTER connector. (For computers having a 25-pin or
USB COM port, the user must supply the appropriate adapter, or use
a serial cable with appropriate connectors on each end.)
2. On the computer, start HyperTerminal by doing one of the following:
- If HyperTerminal has already been set up to communicate with the
Hi Flow Sampler, then select Start > Programs > Accessories >
Communications > HyperTerminal , and double-click the filename
or icon that has been associated with the instrument.
- If HyperTerminal has never been run in association with the Hi
Flow Sampler, then a new HyperTerminal connection needs to be
made as follows:
a. Select Start > Run . In the Run box type “
hypertrm.exe
” and
click OK. The New Connection dialog box should appear.
b. Type in a New Connection Name such as “
HiFlow
”. Click OK to
select the default icon (if desired, select a different icon before
clicking OK). The Connect To dialog box should appear.
c. Click
the Connect using drop-down menu and choose the COM
port to which the Hi Flow is connected. Then click OK to display
the COM Properties dialog box for that COM port.