Bacharach 0024-9551 Скачать руководство пользователя страница 7

Страница: 7 / 73

0024-9551

Revision 1

PCA

400 User Manual

Alert

Icon

Description

DANGER

Imminently hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING

Potentially hazardous situation which, if not avoided, could

result in death or serious injury.

WARNING

Potential electrical shock hazard which, if not avoided, could

result in death or serious injury.

WARNING

Hot surface which, if not avoided, could result in physical injury

or damage to the product.

CAUTION

Potentially hazardous situation which, if not avoided, could result

in physical injury or damage to the product or environment. It

may also be used to alert against unsafe practices.

IMPORTANT

Additional information on how to use the product.

1.2.2 Iconography

WARNING

When testing an appliance, a full visual inspection should be performed to

ensure its safe operation.

WARNING

This analyzer is not intended to be used as a safety device.

1.3 General Safety Statements

CAUTION

This analyzer is designed for on-demand and / or semi-continuous sampling

and is not intended to be used on a continuous basis.

CAUTION

Do not store instrument or its sensors with solvents or products which

contain solvents.

WARNING

This analyzer has not been designed to be intrinsically safe for use in areas

classified as being hazardous locations. For your safety,

DO NOT use it in hazardous

(classified)

locations.

Содержание 0024-9551










































































Результаты поиска

Содержание 0024-9551

Отзывы:

Бренды по названию

Популярные бренды

Bacharach 0024-9551, Руководство пользователя

Результаты поиска

Содержание 0024-9551

Отзывы:

Бренды по названию

Популярные бренды