Bacharach 0024-9551 Скачать руководство пользователя страница 17

Страница: 17 / 73

0024-9551

Revision 1

PCA

400 User Manual

CAUTION

Lithium-Ion batteries contain elements that may pose health risks to

individuals if they are allowed to leach into the ground water supply. Always dispose

of batteries in accordance with local regulations.

WARNING

DO NOT disassemble battery pack or short battery contacts, as this

may result in electrical shock.

DANGER

Batteries may pose risk of explosion, fire or chemical burns if mistreated:

• NEVER

dispose of batteries in a fire or incinerator.

• NEVER expose batteries to corrosive liquids.

• DO NOT attempt to charge batteries which are swollen or bulging.

IMPORTANT

Operating the analyzer with the AC power adapter DOES NOT charge

its rechargeable batteries. To recharge the analyzer’s batteries, supply power via

the AC power adapter when the analyzer is turned OFF.

Fig. 2-10:

Configurations for Li-ion Battery Pack and 4

AA Batteries

AA Battery Tray

Li-ion Battery Pack Connection

IMPORTANT

Replacement parts and accessories are sold separately. See Part

Numbers

(Section 7.1)

for more information.

2.3 Power Configurations

The PCA

400 comes standard with a rechargeable lithium-ion battery pack which is

capable of powering the analyzer for up to 12-hours. Users may also run the analyzer

on 4 × AA batteries or via the supplied Micro-B USB cable and AC power adapter.

Содержание 0024-9551










































































Результаты поиска

Содержание 0024-9551

Отзывы:

Бренды по названию

Популярные бренды

Bacharach 0024-9551, Руководство пользователя

Результаты поиска

Содержание 0024-9551

Отзывы:

Бренды по названию

Популярные бренды