Bacharach 0024-9551 Скачать руководство пользователя страница 11

Страница: 11 / 73

0024-9551

Revision 1

PCA

400 User Manual

Fig. 2-3:

Navigation Keypad

Back Key

Displays the previously viewed screen. In

addition, if changes have been made to one of the

analyzer’s operating parameters

(e.g., date, time, O

reference, etc.)

, pressing this button aborts any changes,

restores the old values and displays the previously

viewed screen.

Home Key -

Displays the Main Menu. In addition, if

changes have been made to one of the analyzer’s

operating parameters

(e.g., date, time, O

reference, etc.)

pressing this button aborts any changes, restores the

old values and displays the Main Menu.

Power Key -

Turns the analyzer ON and OFF.

Navigation Keys -

Move the cursor on the display. When

viewing a directory, use the

 

buttons to open and

close sub-directories.

Enter Key -

Selects a highlighted item. In addition,

if changes have been made to one of the analyzer’s

operating parameter

(e.g., date, time, O

reference, etc.)

pressing this button confirms those changes and saves

them in memory.

CAUTION

DO NOT subject display to excessive shock.

CAUTION

Periodic cleaning with a lightly moistened soft cloth is recommended.

DO NOT wipe display with a dry cloth, as it may scratch the surface.

CAUTION

DO NOT use organic solvents or detergents to clean the display, as they

may cause damage to the screen.

DANGER

Display contains liquid crystal which is poisonous. If liquid crystal comes

in contact with skin, wash immediately with soap and water. If ingested, immediately

contact the local poison control center.

2.1.2 Keypad

2.1.3 Display

Содержание 0024-9551










































































Результаты поиска

Содержание 0024-9551

Отзывы:

Похожие инструкции для 0024-9551

Бренды по названию

Популярные бренды

Bacharach 0024-9551, Руководство пользователя

Результаты поиска

Содержание 0024-9551

Отзывы:

Похожие инструкции для 0024-9551

Бренды по названию

Популярные бренды