25
26
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
WARNING:
The rear platform and jump seat
are designed to accommodate a child who is at least
2 1/2 years old, has good balance and coordination,
and is not over 40 inches tall.
To remove the rear seat:
Detach
the recline strap from the frame
by folding and sliding the strap
through the “D-ring” located on
the end of the strap (Fig. 13a).
And remove any remaining straps
that are attached to the stroller
frame.
Place stroller on its side. Remove
the attachments underneath the
rear seat as shown (Fig. 13b).
To reattach the rear seat:
Reverse the steps above.
Jump Seat
13
Fig. 13a
Fig. 13b
Rear Seat/Jump Seat:
To use jump seat, please remove
the rear child tray, rear canopy and rear seat.
To remove the rear child tray:
See (Fig. 4d) for details.
To remove the rear canopy:
Reverse step 6.
Underneath the rear seat
D-Ring
WARNING:
Do not use jump seat at this
point. The harness strap must be adjusted.
WARNING:
The rear platform and jump
seat are designed to accommodate a child who
is at least 2 1/2 years old, has good balance and
coordination, and is not over 40 inches tall.
Using the Rear Jump Seat
14
Center Clasp
Waist Strap
Crotch Strap
Adjust for a Snug Fit
NOTE:
Rear seat should be
removed.
(1)
Crotch buckle must
face stroller rear during use of the
jump seat
.
(2)
Use the strap and anchor under
seat to
RESET
the crotch buckle
accordingly.
Have the child sit on the jump seat
facing backwards. Secure the child
with the jump seat 3-point harness.
View of harness storage pocket
location (Fig. 14a).
Put the seat belt around the child’s
waist, and buckle to the crotch strap
(Fig. 14b). Adjust the seat belt to be
snug around the child’s waist.
TO RELEASE:
Push the button on
the center clasp and all the harness
straps will release (Fig. 14c).
Jump Seat 3-point Harness
Fig. 14a
Fig. 14b
Fig. 14c
Face buckle
to stroller
rear
Storage
1
2