9
10
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
BRAKES
6)
• To activate the wheel brakes, press
downward on the levers. To release, lift
upward on the lever (Fig. 6).
FOLDING PLAYARD
7)
• Release the hook and loop fastener holding
the Mattress from underneath the Playard
floor or the Bassinet and set the mattress
aside.
DO NOT
unlock top rails yet, center of floor
handle must be raised before top rails will
unlock.
• Rotate the center handle counter-clockwise
90 degrees and raise the center as high as
the top rails (Fig. 7). Gather the Legs and
Wheels together towards the center as close
as possible so that they nearly touch.
8)
• Locate the rail latch release in the center and
bottom side of each rail. Squeeze the lever
with two hands until the rail releases the two
tubes (Fig. 8a), then push down (Fig. 8b).
NOTE:
If the top rail(s) do not release
completely,
DO NOT FORCE!
Lift the center
of floor higher. Both tubes must be released
for the top rail to fold.
Fig. 6
Rotate before lifting
Fig. 7
9)
• Gather all four (4) corners and the
center together tightly (Fig. 9). Wrap
Mattress around Playard frame with
padded side facing inward.
10)
• Secure the hook and loop fasteners by
feeding them through the loops on the
end of the mattress then fold them
back onto themselves (Fig. 10).
• Place folded Playard into carry bag so
that the handle comes through the
opening between each side of the
zipper.
Latch release
Tube
Tube
TOP RAIL
Center latch
Fig. 8b
Fig. 8a
Fig. 9
Fig. 10
