background image

10

www.babylove.com.au

CLEANING

•  To clean vinyl and metal parts wipe with a clean wet cloth and a mild soap and 

water solution.

•  To clean woven fabric use upholstery cleaner such as normally used on furniture or 

a mild soap and water solution.  Allow fabrics to air dry, out of direct sunlight.

•  Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.

CARE AND MAINTENANCE

•  Check the main components and other parts operate freely and are secure.  Check 
  

regularly for wear & tear, loose fasteners and damage. Tighten any loose fasteners.  

  

Replace any worn or damaged parts immediately using only Babylove approved 
parts.

•  Moving parts may require occasional lubrication with a dry lubricant or a silicon 

based spray lubricant.  This will help to avoid squeaks.

•  Exposure to direct sunlight will fade most fabrics over time. To limit the effect of UV 
  

fading, avoid leaving the stroller in direct sunlight where practical.

MODEL VARIATIONS

•  Note that the fabric patterns and colours pictured on the stroller in this instruction 
  

manual may vary from that of the product that you have purchased.

03

www.babylove.com.au

1.  TO OPEN THE STROLLER

A. 

Hold the stroller by the handles and release the 
storage latch. Squeeze the frame together if necessary. 

B. 

Lift the handles and allow the front legs to drop 
towards the floor. Do not try to open the stroller by 
forcing the handles apart.

C. 

Push down on the lower locking bar until the frame  is 
fully opened and locked.

D. 

Check that both the upper hinge and lower locking 
bar are fully engaged.

2.  TO ASSEMBLE & REMOVE THE FRONT SWIVEL WHEELS

A. 

Take each front swivel wheel assembly and press it    
onto each of the front legs.

B. 

Check that each wheel is fully engaged and secured   
by pulling against it.

C. 

To remove the front swivel wheels, use an object such 
as a screwdriver to press the black tabs on the wheel 
stem. The wheel will release and can be lifted off.

A

B

C

D

A

C

Содержание maxima







Отзывы: