08
www.babylove.com.au
10. TO FOLD THE STROLLER
A.
Remove the rain cover (where supplied or fitted),
close the canopy and place the backrest in the fully
upright position. Apply the brakes and lock the
swivel wheels.
B.
Lift the lower hinge lock (at the bottom).
C.
Depress and release the secondary lock. Pull up on
loop and push handles forward until the frame is
fully folded.
D.
Squeeze frame together and apply the storage latch.
A
C
B
C
D
05
6. USING THE TETHER STRAP
WARNING: Use the tether strap to prevent the stroller from
rolling away.
NOTE: A tether strap is fitted to this stroller, place the loop
over desired wrist when using the stroller.
A.
Should you need to change wrist, remove the tether
strap and apply to the other handle. To ensure a tight
fit, loop the tether strap around rather than over the
handle. Open the end of the tether strap and insert the
opposite end through the opening created. Pull until
tether strap tightens around handle.
NOTE: Fit the strap below the frame support bar so that it
does not slide off the handle.
7. TO ADJUST THE LEG SUPPORT
A.
Lower the leg support by pressing up the release
latches located underneath on both sides of the leg
support. Then push the leg support down.
B.
Raise the leg support by lifting it until the release
latches lock into place.
www.babylove.com.au
