34
35
Long Messy Mat™
Short Messy Mat™
Pockets
(where fitted)
Pockets
(where fitted)
MESSY MAT™ SEAT PROTECTOR (IF SUPPLIED)
Place ribbed or pocket end of the Messy Mat™ seat
protector on edge of car seat, smooth back toward
seat join (’A’) and fit in any excess Messy Mat™ into
the join of the car seat (’A’).
Hook and loop attachment referred in some
instruction books, are no longer required to fit this
model of Messy Mat™ seat protector.
CAUTION:
The pocket is only for small, light items. DO NOT
overload the pocket with heavy, bulky items as this
may damage the pocket or cause passengers to trip
over them.
CUP HOLDERS (IF SUPPLIED)
The Child restraint Seat has the facility to fit a cup holder
on either side of the seat. Fit the cup holder onto the seat
to use. Ensure the cup holder and its contents can not be
crushed by the car door. Cup Holder can be removed if not
in required.
IMPORTANT:
Only use for holding cups, bottles and drink cartons. Do
not use for hot drinks
Cup holder
A
A
ACCESSORIES & FEATURES
ACCESSORIES & FEATURES
Use of aftermarket accessories, that is, accessories not provided with this child restraint can reduce the
safety of the child restraint and may cause injury or death. Always follow the instructions covering the use
of accessories in this section or the instructions provided with accessory. If an aftermarket accessory is
used that is not recommended by Nursery Elegance then ensure that the accessory is for this restraint
compliant with AS/NZS 8005 and stated as suitable for use with this child restraint. The following
instructions apply to accessories that may be supplied with this restraint at point of purchase. If not, a
variety of Babylove accessories are available from various retailers of Nursery Elegance products.
CROTCH PAD (IF FITTED)
The Crotch Pad is designed to provide extra comfort
for baby or child and is fitted to the restraint as follows:
Feed Crotch Buckle through the slot in crotch pad as
shown.
PADDED INSERT (IF FITTED)
The Padded Insert is designed to snugly support
the baby for extra comfort. Simply place the padded
insert on the restraint between Harness straps and the
restraint back. Ensure padded insert is lined up with or
below the shoulder straps.
Discontinue use if the Insert causes discomfort or
when the child's shoulders reach the Middle Shoulder
Height Marker. This will allow the child to use the in-
built harness longer.
SHOULDER PADS (IF FITTED)
Shoulder Pads are designed to provide extra comfort
for baby or child and are easily fitted to the shoulder
harness straps by:
A.
Pull apart fasteners and remove shoulder pads from
harness.
B.
Re-fit shoulder pads to harness and attach fasteners
for use.
Messy Mat
Shoulder
Pads
Crotch
Pad
Padded
Insert
