BaBylissPro BAB8700U, Руководство пользователя

Страница: 6 / 12

remaining. A 3 hour charge will provide approximately 120 minutes use.
A 30 minute quick charge will provide approximately 30 minutes use.
• If the charging light starts to flash rapidly (more than 4 flashes per
second) then the appliance is faulty. If this happens then please stop
charging and remove the adapter from the mains and contact the Conair
Customer Care Line. (See ‘UK After Sales Service’ section for further
information).
Preserving the Batteries
• In order to maintain the optimum capacity of the rechargeable batteries,
the appliance should be recharged for 3 hours approximately every 3
months.
• Using the clipper on the mains - ensure that the clipper is switched off.
Plug into a suitable mains socket. Wait for approximately a minute, and
then switch on.
IMPORTANT: Do not use the clipper in this mode for more than 20
minutes.
Clipping
For an all over even cut:
• Attach a comb guide as required – your clipper is supplied with 6
comb guides (grades 1-6). Each comb guide is labelled.
• Switch the clipper to the ‘I-ON’ position and the blades will start to
move.
• Starting at the nape of the neck, hold the clipper with the teeth of
the comb guide pointing upwards, ensuring that the comb guide is
resting flat against the head.
• Slowly move the clipper upwards and outwards through the hair
towards your crown, against the direction of the hair growth. The
comb guide will help to lift the hair and the blades will cut the hair at
the desired length.
• Once the desired length is achieved at the back of the hair, start
clipping the top and sides.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head, and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• You should achieve an even length cut all over your head.