BaBylissPro BAB8700U, Руководство пользователя

Страница: 7 / 12

For a shorter back and sides, with length on the top:
• Attach the longer comb guide as required for the top of your hair –
your clipper is supplied with 6 comb guides (grades 1-6). Each comb
guide is labelled.
• Switch the clipper to the ‘I-ON’ position and the blades will start to
move.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• If you then wish to take the back and sides of your hair to a shorter
length, switch off the appliance and attach a shorter comb guide.
• Starting at the nape of the neck, with the comb guide flat against
the head, move the clipper upwards and outwards over the area you
want to take shorter.
• Repeat on the sides of the hair, starting with the teeth of the clipper
pointing upwards and comb guide flat against the area above the ear,
again moving the clipper upwards and outwards.
Outlining:
• To tidy up the edges around your cut e.g. neckline and sideburns,
detach the comb guides.
• Hold the appliance upside down, so the front of the clipper is facing
towards your head.
• Hold the clipper straight on your sideburns or neckline and move the
clipper downwards. This will give you a clean, smooth finish.
Cleaning & Maintenance
• To maintain optimum performance, the appliance should be cleaned
after each use.
• Blow away any remaining hair on the blades or use the cleaning
brush provided.
• Remove the comb guide. The comb guide can be rinsed under
running water. Ensure they are dried thoroughly before storage or
further use.
• Do not disassemble the blades.
• Oil the blades after every use to ensure optimum cutting performance.