Attaching a comb guide
To attach a comb guide, ensure the appliance is switched off. Position
the comb guide over the blades and slide the sides into the slots either
side of the blades until it clicks.
To remove the comb guide, place your fingers each side of the of the
comb guide and gently pull down and away from the unit.
The appliance is also supplied with a left and right ear taper guide. This
can be used above the ear to get a clean line.
Preparation for Use
• Always inspect the appliance for noticeable signs of damage. Do not
use if damaged (see UK After Sales Service).
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc. (see Cleaning & Maintenance of clipper).
• Ensure the appliance is well oiled (see Oiling Instructions).
• Ensure the appliance is sufficiently charged or plugged into the mains.
• For best performance use on clean, dry hair that has been combed
until tangle-free.
• Prior to use always inspect the head for warts, moles, spots and
broken skin. Special care should be taken to avoid injury and cuts.
• Remove any head jewellery such as earrings and necklaces before
use.
NOTE:
The appliance should not be used for longer than 20 minutes
when operated from the mains.
WARNINGS:
The clipper is for use only on the head. Never use the clipper on the
face or any other area of the body.
