15
Setting up the canopy
1.
Thread the two canopy rods through the inserts of the canopy
fabric.
2.
Connect the canopy rods to the canopy connectors. Note the L
and R marked on each so you know which is left and right
Please note: the canopy won’t extend correctly if the canopy
connectors are on the wrong sides and damage may be caused to the
canopy rods, resulting in your canopy becoming unusable, please
ensure they are on the correct sides of the pram frame.
3.
Once the connectors are on you can secure the fabric to them
using the two elastic loops on each side.
4.
To attach to the frame, ensure you bassinet/seat is facing the
push-bar and approach from the front of your pram that has swivel
wheels. First secure the bottom side of the connector to the frame, then
pull and clip the topside over and into place. Repeat on other side.
Make sure the connectors are as close to the middle of the frame as
they can be.
5.
Finally pull the fabric over the bassinet/seat and into place.