![background image](http://html1.mh-extra.com/html/babybee-prams/comet/comet_instruction-manual_3224335006.webp)
06
Step 1: Install the brake and wheels
1.
To release the frame from the folded position, simultaneously
pull back on the black frame release clips and lift. These clips can be
found either side of the frame.
2.
When the frame is fully open you will hear a “click”.
3.
At the rear of the frame, take the brake attachment section
and attach this to the frame. Push down until you feel a ‘click’ and
when you can see the two sliver locking pins in place.
4.
Now you’re ready to attach the large rear wheels. Push each
wheel onto the pin until you hear a “click”.
5.
Move around to the front wheel location and insert each front
wheel pin into the socket until you hear a “click”.
6.
With all of the wheels now in place, individually pull them just to
make sure they are all securely held in place.