ASSEMBLY
ASSEMBLY
5
6
Copyright © 2019, Baby Trend Inc., All Rights Reserved.
Copyright © 2019 Baby Trend Inc., All Rights Reserved.
Fig. 2
Fig. 3a
Fig. 3b
FRONT WHEELS
2)
• Insert each front wheel into
the housing on both sides
of stroller frame. Line up the
peg with the housing and
firmly push into place (Fig. 2).
REAR AXEL - PLATFORM
3)
• From the underside, align the
rear axle with platform over
the rear frame tubes. Push
in evenly on both sides until
secure (Fig. 3a).
• Ensure to press the rear axle-
platform under the lower bar
(Fig. 3b).
NOTE:
Ensure the
rear axle-platform clicks into
position on both sides. Pull
on each side to ensure it is
locked in place before use.
NEVER
use stroller if the
rear axle-platform does not
lock into place. If you need
assistance, please contact
the customer service line for
additional assistance: TOMY
Australia Toll Free No: 1 800
492 236.
black
cap facing
outwards
CHILD TRAY
WARNING:
The child’s
tray is not a restraint device:
always secure your child with
the seat belt. DO NOT lift the
stroller by the child’s tray.
Use care when child is in the
stroller and securing the front
tray. Do not place hot liquids
or more than 5 lbs (2.26 kg) in
the child tray. Serious burns
or unstable conditions could
result.
4)
•
To attach the child tray:
push
the tray downward and onto
each side of the front armrests
until both sides snap into place
(Fig. 4a). Check that the tray
is secured by slightly pulling it
upwards.
•
To access the child seat:
pull
one release lever (Fig. 4b) on
the underside of the child tray
and lift upward. Either side can
rotate up to access the seat
(Fig. 4c).
NOTE:
To remove
the child tray: Pull each release
lever on both sides of the tray
and pull upward.
Fig. 4b
Fig. 4a
Release
Lever
Fig. 4c
