![background image](http://html1.mh-extra.com/html/baby-trend/sit-n-stand-shopper/sit-n-stand-shopper_instruction-manual_3336924009.webp)
SAFETY
SAFETY
15
16
Copyright © 2019, Baby Trend Inc., All Rights Reserved.
Copyright © 2019 Baby Trend Inc., All Rights Reserved.
USING THE REAR JUMP SEAT
WARNING:
The rear
platform and jump seat are
designed to accommodate
a child who is at least 2 1/2
years old, has good balance
and coordination, and is not
over 40 inches tall.
10)
• The shoulder straps of the
5-point harness have 3
attachment positions. Select
the position that places the
shoulder strap level with, or
below the top of the child’s
shoulder. Thread the straps
through the harness slots
to adjust it to the child’s
shoulder height
(Fig. 10a).
• Place child in rear-facing
seating position. Insert the
male end of each shoulder/
waist belt into the buckle on
the crotch strap (Fig. 10a).
• Tighten the harness to be
snug around the child’s waist
and over the child’s shoulders
(Fig. 10b).
•
RELEASE!
Push the button
on the center clasp and the all
the harness straps will release
(Fig. 9c).
Fig. 10b
Rear jump seat
5-point harness
Adjust
FRONT SEAT RECLINE
NOTE:
Only use recline for the front
seat. Always place in the upright
position when using the jump seat:
SEAT BACK POSITION
WARNING:
The
upright position should be
used only for a child that is at
least 6 months old.
11)
• To recline the seat press the
clip ends together to release
and pull down. To place seat
into an upright position, press
the clip ends together while
holding the end of strap. Push
clip upwards to secure into
desired position (Fig. 11).
Reclined
Upright
Fig. 11
shoulder
height
Fig. 10a