5
6
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
ASSEMBLY
Extension Tubes
TO ASSEMBLE BOOSTER SEAT
•
ONLY
approved
SNAP TECH
TM
products can be
used on the frame.
4)
• Slide Footrest posts into the front of the
Seat until it clicks into place (Fig. 4a).
• Connect the Seat and lock into place
(Fig. 4b). Pull up to make sure it’s locked
firmly in place before use (Fig. 4c).
2)
• Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 2).
3)
• Connect the Front and Rear Legs to the
Upper Frame Assemblies by inserting
the tube ends into the extension tubes
(Fig. 3).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
Release Handle
Fig. 2
Fig. 4a
Fig. 4b
Fig. 4c
Fig. 3
Front Leg
Rear Leg